{"id":952,"date":"2016-02-17T19:02:06","date_gmt":"2016-02-17T18:02:06","guid":{"rendered":"http:\/\/www.aperuzza.com\/en\/?page_id=952"},"modified":"2022-04-13T19:41:08","modified_gmt":"2022-04-13T18:41:08","slug":"polipropilene-satinato-release-film-for-manufacturing-composites","status":"publish","type":"page","link":"https:\/\/www.aperuzza.com\/en\/film-for-composites\/polipropilene-satinato-release-film-for-manufacturing-composites\/","title":{"rendered":"Polipropilene Satinato Release Film for Manufacturing Composites"},"content":{"rendered":"

 <\/h3>\n

Release High Tech Films used for the Manufacturing of Composites<\/strong><\/span><\/h3>\n

 <\/p>\n

Polipropilene Satinato in Reels for the Wrapping of Tubolar Items in the Roto-Traslaction Process<\/strong><\/span><\/h3>\n

 <\/p>\n

 <\/h3>\n

In 1998 the company’s research on new materials for the production of composites has got an important success with the introduction in the market of Polipropilene Satinato<\/strong> (matt). This film has been designed for the production of composite materials made with epoxy and polyester resins and with glass, carbon and arammidic fibers.<\/p>\n

 <\/p>\n

Polipropilene Satinato was the first film<\/strong><\/span> which, used in direct contact with the resin, gets a special opaque (matt) finish<\/strong><\/span> of the composite without the need of sanding or of painting.<\/p>\n

 <\/p>\n

This film can be used in many processing methods.<\/strong> In the beginning it was designed to be used with the roto-translaction process (to manufacture tubolar composites with a circular or elliptical section, and with a conical or slightly conical structure). Later on it has been successfully introduced also in manual taping (to get complex or irregular shaped items), and in moulding (to produce both flat panels and complex forms).<\/p>\n

 <\/p>\n

General Features of Polipropilene Satinato in the Manufacturing of Composite<\/strong><\/span><\/h4>\n

 <\/p>\n

Polipropilene Satinato is made on our specifications<\/strong>, with a targeted recipe concerning the polypropylene grade and a peculiar production process which gives mechanical strength and other physical features.<\/p>\n

 <\/p>\n

This film has poor mechanical properties<\/strong> and a limited heat-shrinkage<\/strong> during the curing cycle. To get tubolar items with good structural characteristics an overwrapping with another film is compulsory.<\/p>\n

 <\/p>\n

The special formulation of the film permits to use it with medium-high temperatures of polymerization<\/strong> (up to 140-150 C).<\/p>\n

 <\/p>\n

Thanks to the special chemical-physical composition Polipropilene Satinato has release capabilities<\/strong> on one side of the film. This film is not coated with laque or silicone for release purposes. In this way no transfer of coating or silicone and no contamination of the composite is possible, and there is no need to clean or sand the item after polymerization.<\/p>\n

 <\/p>\n

The Special Matt Look<\/strong><\/span><\/h4>\n

 <\/p>\n

Used in direct contact with the resin a matt (opaque) surface<\/strong> of the composite is obtained. In the production of tubolar items very light or light steps given by the thickness of the tape are left on the surface.<\/p>\n

 <\/p>\n

Primary Wrapping and Manual Taping<\/strong><\/span><\/h4>\n

 <\/p>\n

In the roto-translaction process<\/strong> and in manual taping<\/strong> it is used to wrap the rod to manufacture in direct contact with the resin (primary wrapping). The main function is to give the matt finish<\/strong> to the composite. But it also keeps all the termosetting resin within the item in the liquid stage and guarantees an easy release at the end of polymerization. In the thinner version it fits well with irregular or highly conical surfaces, so it can be used for highly conical rods and ovals.<\/p>\n

 <\/p>\n

Moulding<\/strong><\/span><\/h4>\n

 <\/p>\n

In moulding<\/strong> it is used in sheets to get flat panels or complex forms and acts as resin constraint, and releaser. A matt surface is obtained. The film is somehow ductile and fits well also with complex or irregular shapes of the mould. Mould’s walls are protected and don’t need to be cleaned after each cycle or to be sanded periodically.<\/p>\n

 <\/p>\n

Product Availability<\/strong><\/span><\/h4>\n

 <\/p>\n

The available nominal thicknesses<\/strong> are 20 and 30 micron, the density is 0,91 g\/cm3, the nominal unit weights are 18 and 27 grams per square metre, the nominal yields 55 and 37 square metres per kilogram.<\/p>\n

 <\/p>\n

Release Films and Tubolar Composite’s Features
\n<\/strong><\/span><\/h4>\n

 <\/p>\n

Our films for the production of composites have outstanding performances only if they are properly used. Very important are, in particular, the wrapping of the tape and polymerization’s conditions.<\/p>\n

 <\/p>\n

On this subject a specific paper is available on request.<\/p>\n

 <\/p>\n

If you want to read something of the functions an high tech release film can do in the manufacturing to improve composites you can click here:  Seven functions fullfilled by high tech release films in the manufacturing of tubolar composites<\/a><\/p>\n

 <\/p>\n

For any further information on films for composites, please don’t hesitate to contact us. Our technical department is at your disposal you may need for any explanation, in-depth analysis, tests, new product or application development both for films and for the production processes of composites.<\/p>\n

 <\/p>\n

For further infomations write, phone, send an email at:<\/strong><\/span><\/p>\n

 <\/p>\n

A. Peruzza srl \u2013 via Portelle 1 \u2013 31010 Mareno di Piave \u2013 Tv \u2013 Italia<\/strong><\/span>
\n Telefono: (int+ 39) 0438 492335. Telefax: (int+ 39) 0438 492365 <\/strong><\/span><\/p>\n

 <\/p>\n

Email: info@aperuzza.com<\/strong><\/span><\/p>\n

 <\/p>\n

 <\/p>\n

\u00a9 1998-2022 A.Peruzza s.r.l.<\/strong> is the sole owner or authorised user of the intellectual property rights relating to the information communicated herein. It is forbidden to copy, include in websites, distribute or anyhow publicize this document to third parties without prior written permission of the owner.<\/p>\n","protected":false},"excerpt":{"rendered":"

  Release High Tech Films used for the Manufacturing of Composites   Polipropilene Satinato in Reels for the Wrapping of Tubolar Items in the Roto-Traslaction Process     In 1998 the company’s research on new materials for the production of composites has got an important success with the introduction in the market of Polipropilene Satinato […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":132,"menu_order":0,"comment_status":"closed","ping_status":"open","template":"","meta":{"ngg_post_thumbnail":0,"footnotes":""},"class_list":["post-952","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.aperuzza.com\/en\/wp-json\/wp\/v2\/pages\/952","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.aperuzza.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.aperuzza.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.aperuzza.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.aperuzza.com\/en\/wp-json\/wp\/v2\/comments?post=952"}],"version-history":[{"count":17,"href":"https:\/\/www.aperuzza.com\/en\/wp-json\/wp\/v2\/pages\/952\/revisions"}],"predecessor-version":[{"id":1687,"href":"https:\/\/www.aperuzza.com\/en\/wp-json\/wp\/v2\/pages\/952\/revisions\/1687"}],"up":[{"embeddable":true,"href":"https:\/\/www.aperuzza.com\/en\/wp-json\/wp\/v2\/pages\/132"}],"wp:attachment":[{"href":"https:\/\/www.aperuzza.com\/en\/wp-json\/wp\/v2\/media?parent=952"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}